Amaç: Farklı polisaj sistemleri uygulanan iki kompozit rezin materyalinin renkleşmeye duyarlılığının karşılaştırılmasıdır. Gereç ve Yöntemler: İki farklı kompozit rezin (Clearfil Majestry Esthetic, Clearfil Majestry Posterior) kullanılarak, kalınlığı 2 mm ve çapı 8 mm disk şeklinde her bir materyalden 40 tane örnek hazırlandı. Her bir restoratif rezin grubu rastgele 4 alt gruba ayrıldı ve kontrol grubu dışında diğer üç grup farklı sistemlerle (Sof-lex, One-gloss, Enhance) cilalandı (n=10). 24 saat distile suda bekletilen örneklerin başlangıç renk ölçümleri yapıldıktan sonra, örnekler 1 hafta kahve ve 1 hafta çay içerisinde bekletildi (3 saat/gün). İkinci renk ölçümleri 14 günlük renklendirme periyodu sonunda spektrofotometre ile tekrarlandı. Elde edilen veriler tek yönlü varyans analizi ve Tukey HSD testi ile değerlendirildi (p<0,05 istatistiksel olarak anlamlı kabul edildi). Bulgular: Anterior kompozit rezin için tüm cila sistemleri arasında istatistiksel olarak anlamlı fark bulunmaz iken (p>0,05), posterior kompozit rezin için ise gruplar arasında istatiksel olarak anlamlı farklılıklar bulundu (p<0,05). En düşük ΔE değeri Posterior Enhance grubunda ve en büyük ΔE değeri Posterior OneGloss grubunda gözlendi. Kompozit rezinler açısından ele alındığında, posterior kompozit rezin gruplarına ait ΔE değerlerinin anterior kompozit rezin gruplarına göre anlamlı ölçüde yüksek olduğu bulundu (p<0,05). Sonuç: Bu çalışmanın sınırları içerisinde, kompozit rezinlerin renkleşmeye duyarlılığı kullanılan rezin ve cila sistemine göre değişmekle beraber, OneGloss cila sisteminin tüm sistemler arasında başarı oranının en düşük sistem olduğu tespit edildi.
Anahtar Kelimeler: Kompozit rezin; cila sistemleri; renklenme; spektrofotometre
Objective: The purpose of this study was to compare the staining susceptibility of dental composites after application the different polishing systems. Material and Methods: Two composite resins (Clearfil Majestry Esthetic, Clearfil Majestry Posterior) were used for this study. Fourty composite resin disks (8 mmx2 mm) were prepared from each material. Specimens were divided four subgroups and polished with three different polishing systems (Sof-lex, Onegloss and Enhance). Other group was used as control group (n=10). Specimens were stored in distilled water for 24 hours and then, baseline color changes were measured with spectrophotometer. Afterwards, specimens were immersed in coffee and tea for 1 week in each (3 h/day). Color changes were remeasured with spectrophotometer after 14 days of the immersion. Data were analyzed by one way ANOVA, post-hoc Tukey HSD test (p<0.05 was considered statistically significant). Results: Although there are no statistically significant difference among polishing groups for anterior composite resin (p>0.05), it was founded statistically significant difference among polishing groups for posterior composite resin (p<0.05). The lowest ΔE value was found in Posterior Enhance group but the highest ΔE value was found in Posterior OneGloss. When comparing the restorative materials, posterior composite resin showed more color change than anterior composite resin (p<0.05). Conclusion: Within the limitations of this study, we can say that the staining susceptibility of composite resins changes according to composite resins and polishing systems, but OneGloss polishing system is the most unsuccesfull among polishing systems.
Keywords: Composite resins; polishing systems; staining; spectrophotometer
- Altun C. [The last improvements in composites]. Gülhane Med J. 2005;47(1):77-82.
- Aschheim KW. Esthetic Denstistry-E Book: A Clinical Approach to Techniques and Materials. 3rd ed. Mosby: Elsevier Health Sciences; 2015. p.3.
- Sari ME, Koyutürk AE, Çankaya S. [Color effect of frequently used food and beverage consumption of children on different filling materials]. Turkiye Klinikleri J Dental Sci. 2011;17(2):140-6.
- Doğan DA, Yüzügüllü B. [Recent technological developments in color seelction]. J Dent Fac Atatürk Uni. 2011;2011(4).
- Gül P, Akgül N. [The spectrophotometrically comparison of the color differences between composite materials with different scales]. J Dent Fac Atatürk Uni. 2013;23(1).
- Schmidlin PR, Gohring TN. Finishing tooth-colored restorations in vitro: an index of surface alteration and finish-line destruction. Oper Dent. 2004;29(1):80-6.
- Saraç D, Saraç Ş, Külünk Ş, Kural Ç, Külünk T. [The effect of polishing techniques and surface varnish on the color stability of the composite resins which have different inorganic filler]. Gazi Üniv Diş Hek Fak Derg. 2006;23(3):169-75.
- Gul P, Harorlı OT, Ocal IB, Ergin Z, Barutcigil C. Color recovery effect of different bleaching systems on a discolored composite resin. Niger J Clin Pract. 2017;20(1):1226-32. [Crossref] [PubMed]
- Okte Z, Villalta P, García-Godoy F, Lu H, Powers JM. Surface hardness of resin composites after staining and bleaching. Oper Dent. 2006;31(5):623-8. [Crossref] [PubMed]
- Schulze KA, Marshall SJ, Gansky SA, Marshall GW. Color stability and hardness in dental composites after accelerated aging. Dent Mater. 2003;19(7):612-9. [Crossref]
- Samra AP, Pereira SK, Delgado LC, Borges CP. Color stability evaluation of aesthetic restorative materials. Braz Oral Res. 2008;22(3):205-10. [Crossref] [PubMed]
- da Rosa Kaizer M, Diesel PG, Mallmann A, Jacques LB. Ageing of silorane-based and methacrylate-based composite resins: effects on translucency. J Dent. 2012;40:e64-e71. [Crossref] [PubMed]
- Celik C, Yüzügüllü B, Erkut S, Yazici AR. Effect of bleaching on staining susceptibility of resin composite restorative materials. J Esthet Res Dent. 2009;21(6):407-14. [Crossref] [PubMed]
- Roeder L, Powers JM. Surface roughness of resin composite prepared by single-use and multi-use diamonds. Am J Dent. 2004;17(2): 109-12. [Crossref]
- Lee YK, Yu B, Lim HN, Lim JI. Difference in the color stability of direct and indirect resin composites. J Appl Oral Sci. 2011;19(2):154-60. [Crossref] [PubMed] [PMC]
- Aykent F, Yondem I, Ozyesil AG, Gunal SK, Avunduk MC, Ozkan S. Effect of different finishing techniques for restorative materials on surface roughness and bacterial adhesion. J Prosthet Dent. 2010;103(4):221-7. [Crossref]
- Morgan M. Finishing and polishing of direct posterior resin restorations. Pract Proced Aesthet Dent. 2004;16(3):211-34.
- Türkün L, Türkün M. The effect of one-step polishing system on the surface roughness of three esthetic resin composite materials. Oper Dent. 2004;29(2):203-11.
- Joiner A. Tooth colour: a review of the literature. J Dent. 2004;32 Suppl 1:3-12. [Crossref] [PubMed]
- Seghi RR, Johnston WM, O'Brien WJ. Performance assessment of colorimetric devices on dental porcelains. J Dent Res. 1989;68 (12):1755-9. [Crossref] [PubMed]
- Kurt M, Turhan-Bal B, Bal C. [Actual methods of color measurement: a systematic review]. Turkiye Klinikleri J Dent Sci. 2016;22(2):130-46. [Crossref]
- Khurana R, Tredwin CJ, Weisbloom M, Moles DR. A clinical evaluation of the individual repeatability of three commercially available colour measuring devices. Brit Dent J. 2007;203(12):675-80. [Crossref] [PubMed]
- Drubi-Filho B, Garcia Lda F, Cruvinel DR, Sousa AB, Pires-de-Souza Fde C. Color stability of modern composites subjected to different periods of accelerated artificial aging. Braz Dent J. 2012;23(5):575-80. [Crossref] [PubMed]
- Ragain JC Jr, Johnston WM. Minimum color differences for discriminating mismatch between composite and tooth color. J Esthet Res Dent. 2001;13(1):41-8. [Crossref] [PubMed]
- Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Res Dent. 2015;27 Suppl 1:S1-9. [Crossref] [PubMed]
- Burgess JO, Walker R, Davidson JM. Posterior resin-based composite: review of the literature. Pediatr Dent. 2002;24(5):465-79.
- Ryba TM, Dunn WJ, Murchison DF. Surface roughness of various packable composites. Oper Dent. 2002;27(3):243-7.
- Reis AF, Giannini M, Lovadino JR, dos Santos Dias CT. The effect of six polishing systems on the surface roughness of two packable resin-based composites. Am J Dent. 2002;15(3):193-7.
- Pratten DH, Johnson GH. An evaluation of finishing instruments for an anterior and a posterior composite. J Prosthet Dent. 1988;60(2):154-8. [Crossref]
- Lee YK, Yu B, Lee SH, Cho MS, Lee CY, Lim HN. Shade compatibility of esthetic restorative materials--a review. Dent Mater. 2010;26(12): 1119-26. [Crossref] [PubMed]
- Maalhagh-Fard A, Wagner WC, Pink FE, Neme AM. Evaluation of surface finish and polish of eight provisional restorative materials using acrylic bur and abrasive disk with and without pumice. Oper Dent. 2003;28(6): 734-9.
- Jung M, Sehr K, Klimek J. Surface texture of four nanofilled and one hybrid composite after finishing. Oper Dent. 2007;32(1):45-52. [Crossref] [PubMed]
- Topcu FT, Sahinkesen G, Yamanel K, Erdemir U, Oktay EA, Ersahan S. Influence of different drinks on the colour stability of dental resin composites. Eur J Dent. 2009;3(1):50-6. [Crossref] [PubMed] [PMC]
- Güler E, Gönülol N, Yücel AÇ, Yılmaz F, Ersöz E. [The comparison of color stability of composite resins after immersion in different drinks]. J Dent Fac Atatürk Uni. 2013;23(1):24-9.
- Barbosa SH, Zanata RL, Navarro MF, Nunes OB. Effect of different finishing and polishing techniques on the surface roughness of microfilled, hybrid and packable composite resins. Braz Dent J. 2005;16(1):39-44. [Crossref] [PubMed]
- Buchgraber B, Kqiku L, Allmer N, Jakopic G, Städtler P. Surface roughness of one nanofill and one silorane composite after polishing. Coll Antropol. 2011;35(3):879-83.
- Vichi A, Ferrari M, Davidson CL. Color and opacity variations in three different resin-based composite products after water aging. Dent Mater. 2004;20(6):530-4. [Crossref] [PubMed]
- Gönülol N, Yilmaz F. The effects of finishing and polishing techniques on surface roughness and color stability of nanocomposites. J Dent. 2012;40 Suppl 2:e64-70. [Crossref] [PubMed]
- Da Costa J, Ferracane J, Paravina RD, Mazur RF, Roeder L. The effect of different polishing systems on surface roughness and gloss of various resin composites. J Esthet Restor Dent. 2007;19(4):214-24. [Crossref] [PubMed]
- Yap AU, Yap SH, Teo CK, Ng JJ. Finishing/polishing of composite and compomer restoratives: effectiveness of one-step systems. Oper Dent. 2004;29(3):275-9.
- St-Georges AJ, Bolla M, Fortin D, Muller-Bolla M, Thompson JY, Stamatiades PJ. Surface finish produced on three resin composites by new polishing systems. Oper Dent. 2005;30(5):593-7.
- Gedik R, Hürmüzlü F, Coşkun A, Bektaş OO, Ozdemir AK. Surface roughness of new microhybrid resin-based composites. J Am Dent Assoc. 2005;136(8):1106-12. [Crossref] [PubMed]
- Antonson SA, Yazici AR, Kilinc E, Antonson DE, Hardigan PC. Comparison of different finishing/polishing systems on surface roughness and gloss of resin composites. J Dent. 2011;39 Suppl 1:e9-17. [Crossref] [PubMed]
- Özel Y, Çelik Ç, Karabulut E. [The effect on surface roughness of composites of different polishing systems]. SÜ Dişhek Fak Derg. 2008;17:39-43.
.: İşlem Listesi