Objective: This study compares different surface conditioning methods applied to various composite surfaces in order to investigate the possible effects on composite-ceramic bond strength. It was aimed to increase the bond strength between flowable composite which is frequently used in the immediate dentin sealing procedure and ceramic surfaces. Material and Methods: Eighty flowable composite and eighty conventional composite discs were prepared with five different surface conditioning methods applied to the discs. The folllowing treatments were applied to the discs: orthophosphoric acid, air-flow, bur conditioning, Er:YAG laser irradition and an unconditioned control group. The composite disc surface roughness was measured with a profilometer. Composite and ceramic (Glass-ceramic blocks, e.max CAD, Ivoclar Vivadent AG, Liechtenstein) discs were then bonded with an adhesive resin cement. The shear bonding test was performed with an universal tester. Results: There was no statistical difference between the conditioning methods applied to flowable composites in terms of bond strength (p>0.05). However, a statistically significant difference was found between the conditioning methods applied to conventional composites regarding bond strength (p<0.05). The highest mean bond strength value was observed with ER:YAG laser conditioned conventional composites and was significantly higher than laser irradiated flowable composite groups. Conclusion: Our data shows that similar bond strength values are obtained when using either flowable or conventional composite resins. In addition, both conventional and flowable composite resins require surface conditioning to achieve reliable adhesion to porcelain material.
Keywords: Conditioning methods; bond strength; composite resin
Amaç: Bu çalışmanın amacı, çeşitli kompozit yüzeylere uygulanan yüzey pürüzlendirme yöntemlerinin, kompozit-seramik arasındaki bağlanma dayanımına etkisini araştırmaktır. Genellikle immediyat dentin kapama işleminde uygulanan akışkan kompozit ile seramik yüzeyler arasındaki bağlanma dayanımının arttırılması amaçlanmıştır. Gereç ve Yöntemler: Seksen adet akışkan kompozit, 80 adet konvansiyonel kompozit örnek hazırlanmıştır. Kompozit yüzeylere 5 farklı pürüzlendirme yapılmıştır. Uygulanan pürüzlendirme yöntemleri; Ortofosforik asit uygulaması, ağız içi kumlama, frez ile pürüzlendirme, Er:YAG lazer ile pürüzlendirme ve kontrol grubu şeklindedir. Kompozit örneklerin yüzey pürüzlülüğü profilometre ile ölçülmüştür. Kompozit ve seramik (Cam-seramik bloklar, e.max CAD, Ivoclar Vivadent AG, Liechtenstein) örnekler adeziv rezin siman ile yapıştırılmış ve üniversal test cihazı ile makaslama bağlanma dayanımı testi uygulanmıştır. Bulgular: Akışkan kompozitlere uygulanan pürüzlendirme yöntemleri arasında bağlanma dayanımı açısından istatistiksel olarak fark bulunmamıştır (p>0,05). Ancak geleneksel kompozitlere uygulanan pürüzlendirme yöntemleri arasında bağlanma dayanımı açısından istatistiksel olarak anlamlı bir fark bulunmuştur (p<0,05). En yüksek ortalama bağlanma dayanımı değeri, Er:YAG lazerle pürüzlendirilmiş konvansiyonel kompozitlerde gözlenmiştir ve lazerle pürüzlendirilmiş akışkan kompozit grubundan daha yüksektir. Sonuç: Akışkan ve geleneksel kompozit rezinlerin porselen ile bağlantısında benzer sonuçlar elde edilmiştir. Hem geleneksel hem de akışkan kompozit rezinlerin porselen ile güvenilir bir şekilde bağlanması için yüzey pürüzlendirme işlemi gereklidir.
Anahtar Kelimeler: Yüzey pürüzlendirme; bağlanma dayanımı; kompozit rezin
- Samartzi TK, Papalexopoulos D, Sarafianou A, Kourtis S. Immediate dentin sealing: a literature review. Clin Cosmet Investig Dent. 2021;13:233-56. [Crossref] [PubMed] [PMC]
- Duquia Rde C, Osinaga PW, Demarco FF, de V Habekost L, Conceição EN. Cervical microleakage in MOD restorations: in vitro comparison of indirect and direct composite. Oper Dent. 2006;31(6):682-7. [Crossref] [PubMed]
- Kaya Y, Değirmenci BU, Değirmenci A. Comparison of the shear bond strength of metal orthodontic brackets bonded to long-term water-aged and fresh porcelain and composite surfaces. Turk J Orthod. 2019;32:28-33. [Crossref] [PubMed] [PMC]
- Padipatvuthikul P, Mair LH. Bonding of composite to water aged composite with surface treatments. Dent Mater. 2007;23(4):519-25. [Crossref] [PubMed]
- Sevmez H, Güngör MB, Yılmaz H. Tam seramik restorasyonlarda uygulanan yüzey işlemleri [Surface treatments of all ceramic restorations]. Ege Üniversitesi Diş Hekimliği Fakültesi Dergisi. 2018;39:148-59. [Crossref]
- De Azevedo Miranda D. Essential considerations for the cementation of facets and ceramic laminates. J Dent Res. 2019;1:1004. [Crossref]
- Pashley EL, Comer RW, Simpson MD, Horner JA, Pashley DH, Caughman WF. Dentin permeability: sealing the dentin in crown preparations. Oper Dent. 1992;17(1):13-20. [PubMed]
- Gresnigt MM, Cune MS, de Roos JG, Özcan M. Effect of immediate and delayed dentin sealing on the fracture strength, failure type and Weilbull characteristics of lithiumdisilicate laminate veneers. Dent Mater. 2016;32(4): e73-81. [Crossref] [PubMed]
- Magne P, So WS, Cascione D. Immediate dentin sealing supports delayed restoration placement. J Prosthet Dent. 2007;98(3):166-74. [Crossref] [PubMed]
- Günsel Kesimli E, Yılmaz Atalı P, Türkmen C. Effect of immediat dentin sealing on the bonding state of hybrid ceramic CAD/CAM restorative material to dentin. European Journal of Research in Dentistry. 2020;4(2):52-8. [Crossref]
- Tezvergil A, Lassila LV, Vallittu PK. Composite-composite repair bond strength: effect of different adhesion primers. J Dent. 2003;31(8):521-5. [Crossref] [PubMed]
- Viwattanatipa N, Jermwiwatkul W, Chintavalakorn R, Kanchanavasita W. Weibull analysis of bond strength of orthodontic buccal tubes bonded to resin composite surface with various techniques. J Orthodontic Waves. 2010;69(2):66-74. [Crossref]
- Erdur EA, Basciftci FA. Effect of Ti:Sapphire-femtosecond laser on the surface roughness of ceramics. Lasers Surg Med. 2015;47(10):833-8. [Crossref] [PubMed]
- Deniz M, Erdur EA, Akın M. Direkt ve indirekt kompozit yüzeylere metal braketlerin bağlanma dayanıklılığının değerlendirilmesi [Evaluation of shear bond strength of metal brackets on direct and indirect composite surfaces]. Selcuk Dental Journal. 2020;7(2):326-33. [Crossref]
- Dall'oca S, Papacchini F, Radovic I, Polimeni A, Ferrari M. Repair potential of a laboratory-processed nano-hybrid resin composite. J Oral Sci. 2008;50(4):403-12. [Crossref] [PubMed]
- Hannig C, Laubach S, Hahn P, Attin T. Shear bond strength of repaired adhesive filling materials using different repair procedures. J Adhes Dent. 2006;8(1):35-40. [PubMed]
- Loomans BA, Cardoso MV, Roeters FJ, Opdam NJ, De Munck J, Huysmans MC, et al. Is there one optimal repair technique for all composites? Dent Mater. 2011;27(7):701-9. [Crossref] [PubMed]
- Papacchini F, Dall'Oca S, Chieffi N, Goracci C, Sadek FT, Suh BI, et al. Composite-to-composite microtensile bond strength in the repair of a microfilled hybrid resin: effect of surface treatment and oxygen inhibition. J Adhes Dent. 2007;9(1):25-31. [PubMed]
- Swift EJ Jr, LeValley BD, Boyer DB. Evaluation of new methods for composite repair. Dent Mater. 1992;8(6):362-5. [Crossref] [PubMed]
- Swift EJ Jr, Cloe BC, Boyer DB. Effect of a silane coupling agent on composite repair strengths. Am J Dent. 1994;7(4):200-2. [PubMed]
- Valizadeh S, Alimohammadi G, Nik TH, Etemadi A, Tanbakuchi B. In vitro evaluation of shear bond strength of orthodontic metal brackets to aged composite using a self-adhesive composite: Effect of surface conditioning and different bonding agents. Int Orthod. 2020;18(3):528-37. [Crossref] [PubMed]
- Wendler M, Belli R, Panzer R, Skibbe D, Petschelt A, Lohbauer U. Repair bond strength of aged resin composite after different surface and bonding treatments. Materials (Basel). 2016;9(7):547. [Crossref] [PubMed] [PMC]
- Brosh T, Pilo R, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent. 1997;77(2):122-6. [Crossref] [PubMed]
- Lima AF, Ferreira SF, Catelan A, Palialol AR, Goncalves LS, Aguiar FH, et al. The effect of surface treatment and bonding procedures on the bond strength of silorane composite repairs. Acta Odontol Scand. 2014;72(1):71-5. [Crossref] [PubMed]
- Farhadifard H, Rezaei-Soufi L, Farhadian M, Shokouhi P. Effect of different surface treatments on shear bond strength of ceramic brackets to old composite. Biomater Res. 2020;24(1):20. [Crossref] [PubMed] [PMC]
- Dehghani M, Ahrari F. The effect of surface treatment with Er: YAG laser on shear bond strength of orthodontic brackets to fiber-reinforced composite. J Clin Exp Dent. 2014;6(4):e379-83. [Crossref] [PubMed] [PMC]
- Spohr AM, Borges GA, Platt JA. Thickness of immediate dentin sealing materials and its effect on the fracture load of a reinforced all-ceramic crown. Eur J Dent. 2013;7(4):474-83. [Crossref] [PubMed] [PMC]
- Carvalho RM, Pegoraro TA, Tay FR, Pegoraro LF, Silva NR, Pashley DH. Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. J Dent. 2004;32(1):55-65. [Crossref] [PubMed]
- Duarte RM, de Goes MF, Montes MA. Effect of time on tensile bond strength of resin cement bonded to dentine and low-viscosity composite. J Dent. 2006;34(1):52-61. [Crossref] [PubMed]
- Jayasooriya PR, Pereira PN, Nikaido T, Tagami J. Efficacy of a resin coating on bond strengths of resin cement to dentin. J Esthet Restor Dent. 2003;15(2):105-13; discussion 113. [Crossref] [PubMed]
- Okuda M, Nikaido T, Maruoka R, Foxton RM, Tagami J. Microtensile bond strengths to cavity floor dentin in indirect composite restorations using resin coating. J Esthet Restor Dent. 2007;19(1):38-46; discussion 47-8. [Crossref] [PubMed]
- Ariyoshi M, Nikaido T, Foxton RM, Tagami J. Microtensile bond strengths of composite cores to pulpal floor dentin with resin coating. Dent Mater J. 2008;27(3):400-7. [Crossref] [PubMed]
- Gresnigt MMM, Cune MS, Schuitemaker J, van der Made SAM, Meisberger EW, Magne P, Özcan M. Performance of ceramic laminate veneers with immediate dentine sealing: an 11 year prospective clinical trial. Dent Mater. 2019;35(7):1042-52. [Crossref] [PubMed]
- Magdy NM, Kola MZ, Alqahtani HH, Alqahtani MD, Alghmlas AS. Evaluation of surface roughness of different direct resin-based composites. J Int Soc Prev Community Dent. 2017;7(3):104-9. [PubMed] [PMC]
- Shahverdi S, Canay S, Sahin E, Bilge A. Effects of different surface treatment methods on the bond strength of composite resin to porcelain. J Oral Rehabil. 1998;25(9):699-705. [Crossref] [PubMed]
.: İşlem Listesi